Tendo

If you have spd 7730/31 cpu related phone and in that issue of pattern lock then dont worry you can easy solve using this tutorial this is not only for spd 7730/31 but every spd cpu related you can done job using this tutorial but here some impotent notes this is working well if any issue in that so you cant solve problem so please read all type tutorial after try following step by step, some time what happen customer take device in office and asking please this problem can be solve ? but also required of customer please do not erase all data because its impotent if you solve as a customer required then customer trust in our office and second type any issue in device then will come to our shop.

This tutorial done in Miracle box its version of 2.32 if you using this method then must check first version this option available in above mention version and in the new feature miracle box not supported of old version because technician cant know new feature in miracle box so i regular update and use this miracle box so i cant easy solve this problem so i request to everyone technician if you free then check our regular update forum and in check about box related there put of update in this box section.

Before use this tutorial must see and carefully read required for unlock this is most impotent and part in this tutorial first of device battery related its must be charged up to 80% and after try, second of box must be working well if not open box then you cant done this job, third of usb driver must installed in your computer or laptop if not installed then first install after try without usb driver you cant connect device with box, fourth of micro usb cable must be working well some device not connect with computer or laptop because here required good quality usb cable cause device always connected with box.

SPD 7730/7731 USB Driver Download here

1. SPD 7730/7731 cpu based phone with good charged battery

2. Miracle box

3. SPD usb driver

4. Micro usb cable

5. Computer or Laptop

1. Download spd driver from above link (if link not working just leave your comment)

2. Extract and install driver (must be installed winzip in your computer)

3. Open Miracle box

4. Go to SPD tab

5. Choose Rd Unlock option

5. Choose Choose Boot type : SPD7730/31 EMMC option

6. Tick on USBCable option

7. Now Click on Start button

8. Press and hold Volume Down button and insert usb cable

9. Wait until driver installing, if driver not installed then update manual from above links

10. If driver installed then starting process automatically then wait until full process

11. Congratulation you are done

In this device i was try to hard reset for remove pattern lock but not success using every tricks volume keys for power but if you want to remove pattern lock without flashing then you can use this tutorial because this is every simple tricks no nay risk or will be any issue because this is tested by me without any error and just a few minute in this tutorial i use miracle box for that but dont worry you can other use chines box but will be option in that because you cant pattern unlock without option, in internet one other way for pattern unlock just you have to download few mb flash file and you can do job using sp flash tool and it also simple way for that just remember every needed for pattern unlock now lets go how to pattern unlock intex aqua 3g+ using miracle box ?

Intex Aqua 3G+ (Plus) Pattern Unlock file only download here

Intex Aqua 3G+ (Plus) full firmware download here

ResearchDownload_VER_2.9.7006 download here

1. Intex Aqua 3G+ (plus) device with good battery charged

2. Miracle box (you can use other chines box)

3. Micro usb cable

4. Computer or Laptop

1. First download tested firmware or unlock file from above link

2. Open Miracle box

3. Go to SPD Tab

4. Choose Write option

5. Select correct boot option : SPD8825/6825/Other{Factory File Write)

6. Choose firmware file which you was downloaded

7. Tick on USBCable option

8. Now last click on Start button

9. Press and hold Volume Down button and insert usb cable

10. After few second wait then one popup box there untick all without USERDATA then click ok

11. Wait until process

12. Congratulation you are done