Wednesday, February 1, 2017
Intex Aqua Glam Hang on Logo or Flash done with SP Flash tool tested
Intex Aqua Glam Hang on Logo or Flash done with SP Flash tool tested
This handset in hang on logo problem when I was check sometimes try to write just user data file device will start normal means solution of hang on logo this way not only hang on logo solution but you can use when your device in pattern lock, screen lock or other software related issue you will easy done using this tutorial before use this way you should mention requirement option because if any not working of requirement then you cant flash it this is impotent of this solution way I suggest everyone who use this tutorial first carefully read all content after following step by step lets see below description about stock ROM firmware.
This flash file tested by me without any error working well, you can use this flash file when your device hangs on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you cant flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you cant save after full flash so must remember all are impotent notes.
Download Link
Intex Aqua Glam Stock Rom Firmware Download here
Intex Aqua Glam Flash tool Download here
Intex Aqua Glam USB (Flashing) Driver Download here
Requirement:
1. Intex Aqua Glam handset2. Intex Aqua Glam Stock Rom Firmware
3. Intex Aqua Glam Flash tool
4. Intex Aqua Glam USB Driver
5. Micro USB cable
6. Computer or Laptop
Method:
1. Download requirement from above link (if link dead just leave your comment)2. Unzip file from WinZip to desktop or as you like path (must be installed WinRAR)
3. Open SP Flash tool folder and choose flash_tool.exe file and open it
4. Click on Scatter-loading button and choose MT6580_Android_scatter.txt file
5. Wait until stock ROM firmware checksum process
6. Now click on Download button
7. Attach USB Cable into device (if not detect device then Press and hold Volume Up button)
8. Wait until driver installing automatically if not installed driver just update from above link driver
9. After detect device start process automatically and wait until full process
10. Do not disconnect while device in flashing mode
11. Congratulation I wish you are done
Intex Aqua Glam Hang on Logo done Screenshot:
Available link for download
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment