Showing posts with label redmi. Show all posts
Showing posts with label redmi. Show all posts
Monday, March 13, 2017
Redmi Note 4G Model 2014712 Flash done with Mi Flash tool tested
Redmi Note 4G Model 2014712 Flash done with Mi Flash tool tested
This device in issue of hang on logo not ahead after full flashing i was different Stock Rom firmware use for flashing but no success so i search in internet for that solution and i found one but i dont sure about new solution but i understand just try and what happen using new found solution just unbeliever just few second done that really awesome for solution no need to flash no need new firmware download just connect device with fastboot mode and just run command in command prompt so if you some time will got solution just try and you will to be better but remember before use check below comment this new solution working well or not after try in flash some time dont show below comment and i try then device will dead or other issue so first read all are content after try step by step solution here some few description about firmware just see below
This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you cant flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you cant save after full flash so must remember all are impotent notes.
Download Link
Redmi Note 4G Model : 2014712 Stock ROM Download HERE
Redmi Note 4G Model : 2014712 MiFlash tool Download HERE
Redmi Note 4G Model : 2014712 USB Flashing Driver Download HERE
Required for Flash:
1. Readmi Note 4G device
2. Redmi Note 4G Stock Rom Firmware
3. Redmi Note 4G MiFlash tool
4. Redmi Note 4G USB Driver
5. Micro usb cable
6. Computer or Laptop
Formality:
1. Take tested Stock ROM firmware from above link (plz if link dead just leave your comment)
2. Go to Firmware winrar and please rename to .tgz, if is .gz or tar
3. Extract to desktop both winrar (Note : Must your firmware folder in desktop)
4. Open Mi folder and choose MiFlash.exe file and open it
5. Click on Browse button and choose firmware folder who in desktop (see below image)
6. Click on Point button near browse button and choose Advance option (see below image)
7. Choose Browse.. button to FastBoot scripts and choose flash_all_except_data_storage.bat file from desktop firmware folder (see below image)
8. Turn off device, Press the Volume Down + Power keys same time for enter Fastboot mode
9. Attach Micro usb cable and click on Refresh button in flash tool (for device detect or not)
10. If device detect with flash tool then click on Flash button
11. Wait until driver install, if driver installed in computer or laptop then downloading automatically start
12. Wait until full flash device
13. Congratulation you are done
Redmi Note 4G Model : 2014712 Screenshot:
Available link for download
Thursday, February 9, 2017
How to boot repair or Flash Redmi Note 2 Prime Dual Sim 4G Model 2014912 with Flash tool Tested
How to boot repair or Flash Redmi Note 2 Prime Dual Sim 4G Model 2014912 with Flash tool Tested
This tutorial tested by me without any error some time we are flashing this device so many time take in flashing so we are search other tool for flashing and easy to flash this device from the many time i search but after many time i found other flash tool and i try this device in this tool so easy procedure easy or not was give many time for flashing so this tool with i have experience so here post new with different tool but here some different procedure from the before flashing tool this tool you can use if before post not success then you can use this tool if you want to first try use so dont worry because this is tested by me its very easy to flash and just remember of required for flashing if any issue in required from yours so first prepare to required after try in flash and we are mention which need to flashing in below and also must remember before use this tutorial which one first read all carefully this tutorial after try in flash because if you read tutorial then you can easy flashing this device this my own experience and must be working well micro USB cable if any issue in this then you cant connect device with computer or laptop also must be working device charging socket if any issue so also you cant connect with computer or laptop must be installed driver in your computer or laptop if not install in your computer or laptop then device not connect so you cant flash see below description about firmware.
If you want to repair your device, you can try to repair it by you.
You have to charge your battery with any charger and charged it by 70%, Your data is very important for you so it is good to do a backup of your data it may consist like your contact details, your important messages, your emails or any other important thing which you feel to be the backup in your device, this backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, sd card or any other suitable devices. If you are doing by your own.do it at your own risk as we dont take any responsibility if your device is damaged.Required for flash:
- Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 device with well battery charged, and do not try with low battery
- Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 Stock ROM Firmware (tested) | Download Mirror-1, Mirror-2
- Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 USB (Flashing) OR Dead Boot Repair driver | Download here
- Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 Flash Tool | Download here
- Good Quality Micro usb cable
- Computer or Laptop
Procedure:
- First download tested Firmware, Flash tool or driver from above link (if link not working just leave your comment on below comment box i will soon fix it)
- Extract to all are zip files to desktop or as you like path (must be installed winrar software to Extract)
- Open Driver folder and choose Qualcomm_USB_Driver_Setup.exe file and wait until finish installation
- Open QPST.WIN.2.7_Installer-00430.1 folder and chose setup.exe file and open and install it
- Now open QFIL from the "C:Program FilesQualcommQPST in" path
- Tick on Flat Build option
- Go to Programmer Path and click on Browse.. button and choose prog_emmc_firehose_8916.mbn file
- Click on Load XML.. button and choose rawprogram_unsparse.xml file and second choose patch0.xml file from the Firmware folder
- Insert USB cable and wait until driver install
- After drier installed just Click on Download button and wait until finish procedure
- Congratulation you are done
Redmi Note 2 Prime Dead Boot Repair done Screenshot:
Available link for download
Friday, September 2, 2016
Redmi 2 Model 2014818 Flash done OR After Flash Hang on Logo Solution Tested
Redmi 2 Model 2014818 Flash done OR After Flash Hang on Logo Solution Tested
This device in issue of hang on logo not ahead after full flashing i was different Stock Rom firmware use for flashing but no success so i search in internet for that solution and i found one but i dont sure about new solution but i understand just try and what happen using new found solution just unbeliever just few second done that really awesome for solution no need to flash no need new firmware download just connect device with fastboot mode and just run command in command prompt so if you some time will got solution just try and you will to be better but remember before use check below comment this new solution working well or not after try in flash some time dont show below comment and i try then device will dead or other issue so first read all are content after try step by step solution here some few description about firmware just see below
This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you cant flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you cant save after full flash so must remember all are impotent notes.
Download Link
(Tested) Xiaomi 2014818 Stock ROM Download HERE
Xiaomi 2014818 MiFlash tool Download HERE
Xiaomi 2014818 USB Flashing Driver Download HERE
Required for flash:
- Xiaomi 2014818 device with good battery charged
- Xiaomi 2014818 tested firmware
- MiFlash tool
- Xiaomi 2014818 usb flashing driver
- Micro usb cable
- Computer or Laptop
Procedure:
- Take tested Stock ROM firmware from above link (plz if link dead just leave your comment)
- Go to Firmware winrar and please rename to .tgz, if is .gz or tar
- Extract to desktop both winrar (Note : Must your firmware folder in desktop)
- Open Mi folder and choose MiFlash.exe file and open it
- Click on Browse button and choose firmware folder who in desktop (see below image)
- Click on Point button near browse button and choose Advance option (see below image)
- Choose Browse.. button to FastBoot scripts and choose flash_all_except_data_storage.bat file from desktop firmware folder (see below image)
- Turn off device, Press the Volume Down + Power keys same time for enter Fastboot mode
- Attach Micro usb cable and click on Refresh button in flash tool (for device detect or not)
- If device detect with flash tool then click on Flash button
- Wait until driver install, if driver installed in computer or laptop then downloading automatically start
- Wait until full flash device
- Congratulation you are done
Redmi 2 Model 2014818 Flash done Screenshot:
Redmi 2 Model 2014818 Flash done Video
How to Solve After Hang on Logo device ?
- Turn off device and take out battery into device
- Insert battery into device
- Press the Volume Down + Power keys same time for enter Fastboot mode
- Insert usb cable into device
- Go to C:Program FilesMi Flash toolGoogleAndroid
- Press SHIFT Key and Right click and choose open command window here
- Type : fastboot -w and Hit Enter key
- Type : fastboot reboot and Hit Enter key
- Congratulation you are done
Redmi 2 Model 2014818 Hang on logo Video done
Note : if any query using this tutorial just leave your comment i will soon reply.
Available link for download
Subscribe to:
Comments (Atom)